Manek - hydraulic vertical cylinder honing machine

Hydraulic Vertical Cylinder Honing Machines

Model: VH-50 (N)

Features:
- Suitable for Automotive Engine Rebuilding and Industrial Honing
- Fully Hydraulic with Infinitely variable speed for spindle rotation and stroke to obtain the desired cross-hatch finish

Model: VH-50 (N)

Model:	VH-50 (N)
Max. Honing Capacity Diameter:	200 mm
Max. Honing Stroke:	450 mm
Min. Honing Stroke:	50 mm
Max. Distance - Table to Spindle Nose:	1000 mm
Distance from Spindle centre to Column:	380 mm
Surface to Table:	1400 x 450 mm
Table Traverse:	1700 mm
Spindle Speeds (Infinitely Variable):	50 - 300 RPM
Reciprocating Speeds (Infinitely Variable):	0 - 16 m / min.
Electric Motor for Spindle Stroke:	1.50 kW
Electric Motor for Hydraulics:	0.75 kW
net / gross Weight:	2000 / 2900
Overall Dimensions:	1.1 x 0.8 x 1.9 and 1.6 x 1.1 x 0.7 m
Shipping Volume:	2.90 m³

Standard Accessories: Two Quick Acting Clamps, Two Setting Up Blocks 100 mm with bolts, Coolant Pump, 1 Honing set of 63.5 - 127 mm diameter

Optional Accessories: Honing set of 2" - 3" diameter, Honing set of 4.5" - 8.5" diameter, set of stones

Model: CH-50 & CH-50H

Features:

- Up and Down push button provided for fast stroke setting
- Spindle stops at the upper set position when switched off
- Can hone at any desired position enabling quick correction of bore by the push of an oscillation button
- Direct reading digital display for spindle rpm
- Infinitely variable spindle rotation and stroke to obtain desired cross-hatch pattern
- Synchronized stopping of reciprocating and rotating movements avoid damage of cross-hatch finish
- L.C. Display provided for self diagnostic features for quick identification of faults

Model: CH-50

Model	CH-50	CH-50H
Max. Honing Capacity Diameter:	140 mm (optional 200 mm)	200 mm
Min. Honing Capacity Diameter:	62 mm (optional 32 mm)	62 mm (optional 32 mm)
Max. Honing Stroke:	350 mm	450 mm
Min. Honing Stroke:	50 mm	50 mm
Stroke Speed (Infinitely Variable):	1 - 12 m / min.	1 - 12 m / min.
Spindle Speeds (Infinitely Variable):	25 - 200 rpm	25 - 200 rpm
Maximum Block Length:	1100 mm	1100 mm
Maximum Block Width:	550 mm	550 mm
Maximum Block Height:	450 mm	450 mm
Honing Head Traverse:	1000 mm	1000 mm
Electric Motor - Spindle Drive:	1.50 HP	2.00 HP
Electric Motor - Power Pack:	1.00 HP	1.00 HP
Net / gross Weight:	720 / 1400 kgs.	750 / 1450 kgs.
Overall Dimensions:	1.9 x 1.5 x 2.25 m	1.9 x 1.5 x 2.25 m
Shipping Volume:	6.5 m³	6.5 m³

Standard Accessories:
With Model: CH-50: Honing head 62 - 140 mm, Setting up parallel 100 mm (1 pair), Block tightening clamp (4 nos.), T bolt with nut and washer (4 nos.), Setting up parallel tightening bolt with nut and washer (2 nos.)
With Model: CH-50H: Honing head 62 - 140 mm, Honing head 115 - 215 mm, Setting up parallel 100 mm (1 pair), Block tightening clamp (4 nos.), T bolt with nut and washer (4 nos.), Setting up parallel tightening bolt with nut and washer (2 nos.)

Optional Accessories:
With Model: CH-50: Honing Head 32 - 62 mm, Honing Head 115 - 215 mm, Quick Clamping Device, ‘V’ type cylinder block clamping fixture, Friction feed hone head
With Model: CH-50H: Honing Head 32 - 62 mm, Quick Clamping Device, ‘V’ type cylinder block clamping fixture, Friction feed hone head

TO OUR PAGE ON AUTOMOTIVE ENGINE REBUILDING MACHINES

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962 Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com