|
|
| 72-C & HV Series Models | HS Series Models |
| 72-C & HV Series Models: |
|
 72-C & HV Series Models |
Features: - Suitable for Grinding of engine blocks and facing of engine heads - Segmental Grinding wheel provided for good accuracy in grinding, ease in setting and adjusting and economy. - Micro feed of the wheel head into the cut is hand operated - The hydraulic equipment with the oil pump motor for the movement of the table is supplied as a separate unit |
| Model: | 72-C No. 1 | HV-1000 | HV-1500 |
| Table Size L x W (mm): | 1220 x 290 | 1125 x 350 | 1650 x 375 |
| Grinding Capacity L x W (mm): | 900 x 280 | 1000 x 320 | 1500 x 320 |
| Size of Magnetic Chuck (mm): | 750 x 250 | 900 x 250 | 1200 x 250 |
| Diameter of Grinding Wheel (mm): | 300 | 400 | 400 |
| Max. Distance from face of grinding wheel to the surface of table (mm): | 600 | 500 | 500 |
| Longitudinal travel of table (mm): | 1100 | 1380 | 1800 |
| motor for Main Spindle (HP): | 10 | 15 | 15 |
| motor for Vertical Movement of Wheel head (HP): | 1.0 | 1.5 | 1.5 |
| motor for Hydraulic System (HP): | 3.0 | 5.0 | 7.5 |
| Net / Gross Weight (kgs.): | 2200 / 2800 | 4000 / 4800 | 5500 / 6500 |
| Dimensions (m): | 3.0 x 1.4 x 2.0 | 2.9 x 1.6 x 2.2 | 3.4 x 1.6 x 2.2 |
| Shipping Volume (m3): | 8.4 | 10.2 | 12.0 |
|
Standard Accessories: Electricals and Magnetic Chuck |
| HS Series Models: |
|
|
Features: - Anti-friction wear resistant liners provided on all sliding surface of the table to minimize wear and tear - Can grind ‘V’ type cylinder blocks with Roll Over Fixture - Grinding head guide ways fully covered by bellows - Grinding head up & down movements motorized |
|
| Model: | HS-1300 | HS-1300V | HS-1500 | HS-1500V |
| Max. automatic Table Traverse (mm): | 1300 | 1300 | 1500 | 1500 |
| Table Size (mm): | 1000 x 275 | 1000 x 275 | 1200 x 275 | 1200 x 275 |
| Head Vertical Traverse (mm): | 600 | 600 | 700 | 700 |
| Max. Grinding Width (mm): | 350 | 350 | 350 | 350 |
| Max. distance Table to Grinding Wheel (mm): | 600 | 600 | 700 | 700 |
| Distance column to table centre (mm): | 350 | 350 | 350 | 350 |
| Segmental Wheel Diameter (mm): | 350 | 350 | 350 | 350 |
| Grinding Spindle Rotating Speed (rpm): | 1500 | 1500 | 1500 | 1500 |
| Milling Spindle Rotating Speed (rpm): | 750 | 160 - 1700 (steplessly variable) |
750 | 160 - 1700 (steplessly variable) |
| Table Feed Speed (steplessly variable) (mm / min.): | 0 - 3000 | 0 - 3000 | 0 - 4000 | 0 - 4000 |
| motor for Main Spindle (HP): | 5.0 | 5.0 | 5.0 | 5.0 |
| Motor for Head Quick Feed (HP): | 0.5 | 0.5 | 0.5 | 0.5 |
| motor for Hydraulic System (HP): | 0.75 | 0.75 | 1.00 | 1.00 |
| Electric Coolant Pump Motor (HP): | 0.12 | 0.12 | 0.24 | 0.24 |
| Net / Gross Weight (kgs.): | 1500 / 2500 | 1500 / 2500 | 1700 / 2700 | 1700 / 2700 |
| Dimensions (m): | 2.5 x 1.3 x 2.0 | 2.5 x 1.3 x 2.0 | 2.8 x 1.4 x 2.1 | 2.8 x 1.4 x 2.1 |
| Shipping Volume (m3): | 7.0 | 7.0 | 8.5 | 8.5 |
| Standard Accessories: Setting
up parallel - 135 mm height (1 pair), Block Tightening Clamp, Head Clamping
Plate with Studs, Wheel Balancing Shaft with nut, Grinding wheel dresser,
Coolant tank with electric pump, Milling Tool, Tool Box Optional Accessories: Wheel Balancer, Roll Over Fixture, Setting up Parallel 50 mm height, Setting up Parallel 250 mm height |
|
TO OUR PAGE ON AUTOMOTIVE ENGINE REBUILDING MACHINES |
|
 |
Maneklal and Sons (Exports) |
 |
