Drilling Machines

Cambia Idioma a Espaņol
Pillar Drilling Machines Radial Drilling Machines Gang Drill Machine Pillar Drilling Cum Vertical Milling Type Drilling Machines
Pillar Drilling Machines

Top

Model: SI - A / 2
Model: SI - 40 / 1
Model: SMA - 1
Model: SEW / S -25
Model: SI - 4
         
Model: SI - A / 2 SI - 40 / 1
Type: Belt Driven with Automatic Feed Geared with Automatic Feed
Drilling Capacity (mm): 40 40
Spindle Nose: MT-4 MT-4
Spindle Travel (mm): 215 215
Number of Spindle Speeds: 8 8
Range of Spindle Speeds (RPM): 75 - 2070 90 - 1000
Number of Power Feeds: 2 2
Range of Power Feed (mm / rev.): 0.08 - 0.04 0.08 - 0.04
Distance from Column to Spindle Centre (mm): 305 305
Distance from Spindle to Base (mm): 1040 1040
Distance from Spindle to Table (mm): 515 515
Column Diameter (mm): 130 130
Base Size (machined area) (mm): 490 x 470 490 x 470
Table Size (mm): 435 x 435 435 x 435
Drilling Motor (HP): 1.5 1.75 / 2.5 (2 Speed)
Net / Gross weight (Kgs.): 400 / 500 500 / 600
Shipping Dimensions (mm): 1140 x 650 x 1950 925 x 650 x 2330
Shipping Volume (m3): 1.45 1.40
 
Model: SMA - 1 SEW/P-4 SEW/P-5
Type: Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed
Drilling Capacity (mm): 13 19 19
Spindle Nose: Solid Spindle MT-2 MT-2
Spindle Travel (mm): 75 125 125
Number of Spindle Speeds: 4 8 8
Range of Spindle Speeds (RPM): 500 - 2825 87 - 3200 87 - 3200
Distance from Column to Spindle Centre (mm): 156 200 200
Distance Spindle to Base (mm): 540 925 640
Distance Spindle to Table (mm): 300 500 / 700 210 / 405
Column Diameter (mm): 47 74.35 74.35
Base Size (Machined area) (mm): 350 x 225 260 x 235 260 x 235
Table Size (mm): 205 x 205 260 x 260 260 x 260
Drilling Motor (HP): 0.5 0.5 0.5
Net / Gross weight (Kgs.): 50 / 75 90 / 110 80 / 100
Shipping Dimensions (mm): 700 x 400 x 1300 700 x 400 x 1600 700 x 400 x 1300
Shipping Volume (m3): 0.40 0.45 0.40
 
Model: SEW / S - 25 SEW / S - 25x380 SI - 3 SI - 4
Type: Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed Belt Driven with Manual Feed
Drilling Capacity (mm): 25 25 40 32
Spindle Nose: MT-3 MT-3 MT-4 MT-3
Spindle Travel (mm): 185 250 215 170
Number of Spindle Speeds: 8 8 8 8
Range of Spindle Speeds (RPM): 73 - 1800 73 - 1800 75 - 2070 75 - 2070
Distance from Column to Spindle Centre (mm): 255 380 305 280
Distance Spindle to Base (mm): 1050 980 1040 1045
Distance Spindle to Table (mm): 650 570 515 625
Column Diameter (mm): 87.60 90 130 114
Base Size (Machined area) (mm): 350 x 325 465 x 370 490 x 470 390 x 390
Table Size (mm): 345 x 345 395 x 395 435 x 435 390 x 390
Drilling Motor (HP): 1 1 1.5 1.5
Net / Gross weight (Kgs.): 190 / 235 215 / 250 300 / 400 250 / 310
Shipping Dimensions (mm): 950 x 500 x 1525 1100 x 500 x 1525 1140 x 650 x 1950 1050 x 600 x 1900
Shipping Volume (m3): 0.75 0.85 1.45 1.20

Standard Accessories:   Electric motor, starter, Drill Chuck and Arbor.

Radial Drilling Machines

Top

Model: SMT 40 / 1000
Model: SMTR - 2
Model: SMT 40 / 1000 SMTR - 2
Drilling Capacity: 40 mm 38 mm
Spindle Nose: MT-4 MT-4
Spindle Travel: 175 mm 220 mm
Number of Spindle Speeds: 8 8
Range of Spindle Speeds (RPM): 90 - 1000 62 - 1980
Number of Power Feeds: 2 2
Range of Power Feed (mm / rev.): 0.20 - 0.10 0.08 - 0.04
Drilling Radius (Max / Min): 1125 / 505 mm 895 / 440 mm
Distance from Column to Spindle Centre (Max / Min): 1020 / 400 mm 810 / 360 mm
Distance from Spindle to Base (Max / Min): 1180 / 380 mm 930 / 230 mm
Column Diameter: 210 mm 165 mm
Vertical Power movement of arm: 800 mm 450 mm
Horizontal movement of Drilling Head: 635 mm 90o
Box Table Size (L x W x H) (mm): 510 x 380 x 355 380 x 300 x 300
Base Plate (L x W x H) (mm): 1625 x 850 x 180 1250 x 760 x 150
Working Surface: 1010 x 690 mm 820 x 610 mm
‘T’ Slot number / size: 3 / 16 mm 4 / 16 mm
Drilling Motor: 2 HP (1400 / 2800 rpm) 1.5 HP
Elevating motor for arm: 1 HP 0.5 HP
Net / Gross weight (Kgs.): 1500 / 1800 1500 / 1800
Shipping Dimensions (mm): 1750 x 1000 x 2000 1250 x 1550 x 2000
Shipping Volume (m3): 3.50 3.90
 

Standard Accessories (SMT 40 / 1000 & SMTR-2): Electric motors, starter, Box Table, Drill Chuck and Arbor, Coolant Pump.

Top

Geared Heavy Duty 'ADM' Series
Model: ADM-50 ADM-65 ADM-75
Drilling Capacity in MS (mm): 50 65 75
Drilling Capacity in CI (mm): 60 75 85
Column Diameter (mm): 310 355 405
Drilling Radius (Min / Max) (mm): 450 / 1100 650 / 1600 675 / 1950
Machine height from floor (mm): 2760 3170 3320
Distance from Spindle Nose to top of Base Plate min. with Spindle in downward position (mm): 100 100 100
with Spindle in upward position (mm): 1300 1600 1750
Drilling Depth (mm): 225 325 325
Working Surface of Base Plate (mm): 975 x 655 1460 x 845 1735 x 940
Dimensions of Base (mm): 1645 x 835 x 200 2370 x 1015 x 210 2640 x 1110 x 210
Dimensions of Box Table (mm): 550 x 400 x 400 600 x 450 x 450 600 x 450 x 450
Spindle Speeds Number / Range: 9 / 40 - 790 rpm 12 / 25 - 930 rpm 12 / 20 - 740
Spindle Feeds Number / Range: 3 / 0.08 - 0.18 mm/rev 6 / 0.10 - 1.25 mm/rev 6 / 0.10 - 1.25 mm/rev
Spindle Nose: MT-5 MT-5 MT-6
Drilling Motor (HP): 3.0 5.0 7.5
Elevating motor for arm (HP): 2.0 3.0 5.0
Net / Gross weight (Kgs.): 3000 / 3500 4800 / 5400 6500 / 7200
Approximate Shipping Volume (m3): 5.0 6.5 8.0
The 'ADM' Series machines have double Columns (inner pillar & outer sleeve). The outer sleeve is fitted on the inner pillar on a set of straight & taper roller bearings. The radial arm is mounted on this outer sleeve, giving it a free and smooth movement.
 
Standard Accessories ('ADM' Series): Electric motors, Panel board, Box Table, Coolant Pump.
Optional Accessories ('ADM' Series): Hydraulic clamping (hydraulic power pack fitted inside the arm of the radial drill for locking the longitudinal, vertical and radial movement by a push button)
Gang Drill Machine

Top
Model: SEW/G-25x2
Drilling Capacity in MS (mm): 25
Column Diameter (mm): 87.6
Distance between two units (mm): 380
Centre of Spindle to Table (mm): 250
Max. Spindle to Table (mm): 350
Taper in Spindle: MT-3
Spindle Travel (mm): 185
No. of Speeds: 8
Range of Speeds (rpm): 73 to 1800
Table Size (mm): 1000 x 610
V-belt section: B-52
Motor (HP): 1.0
Net / Gross weight (Kgs.): 380 / 450
Shipping Dimensions (mm): 1200 x 750 x 1525
Approximate Shipping Volume (m3): 1.40

Standard Accessories:   Electric motor, R & F Switch, V-belts & Drift Key
Pillar Drilling Cum Vertical Milling Type Drilling Machines

Top
Model: DCM-32
Type: Belt Driven
Drilling Capacity (mm): 32
Spindle Nose: MT-4
Number of Spindle Speeds: 8
Range of Spindle Speeds (RPM): 50 - 1550
Size of Universal Milling Table (mm): 600 x 200
Drilling Motor (HP): 1.0
Approximate Net / Gross weight (Kgs.): 450 / 550
Approximate Shipping Dimensions (mm): 1800 x 750 x 750
Approximate Shipping Volume (m3): 1.00

Model: DCM-32

Standard Accessories: Electric motor, Reversible Switch, Drill Chuck & Arbor.

  

TO OUR PAGE ON MACHINE TOOLS

Back     Next
M&S Logo

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962    Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com

Home   Top