|
|
 |
|
Specifications: |
| Model: | GHB-250 | GHB-300 | GHB-600 | GHB-750 | GHB-1200 |
| Capacity: | 10” (250 mm) | 14” (350 mm) | 24” (600 mm) | 30” (750 mm) | 48” (1200 mm) |
| Max. Continuous Output (Max. Pitch): | 3 Module / 8 DP | 4 Module / 6 DP | 6 Module / 4 DP | 8 Module / 3 DP | 12 Module / 2 DP |
| Max. diameter of Gear with support (mm): | 250 | 350 | 600 | 750 | 1200 |
| Max. diameter of Gear without support (mm): | 300 | 450 | 700 | 1000 | 1300 |
| Max. Helix angle: | 45o | 45o | 45o | 45o | 45o |
| Diameter of Work Table (mm): | 250 | 305 | 355 | 510 | 710 |
| Diameter of Work Mandrel (mm): | 32 | 32 | 32 | 40 | 40 |
| Diameter of Working Spindle (mm): | 65 | 75 | 75 | 90 | 100 |
| Diameter of Hole in Spindle (mm): | 14 | 20 | 20 | 20 | 25 |
| Min. distance between work & hob cutter (mm): | 5 | 5 | 5 | 12 | 25 |
| Max. Travel (face of gear): | 8” (200 mm) | 10” (254 mm) | 14” (355 mm) | 20” (508 mm) | 28” (711 mm) |
| Max. diameter of Hob Cutter (mm): | 100 | 100 | 110 | 135 | 200 |
| Hob spindle and arbour taper: | ISO-40 | ISO-40 | ISO-40 | ISO-40 | ISO-40 |
| Usable length of cutter (mm): | 75 | 75 | 100 | 125 | 150 |
| Number of Hob Spindle Speeds: | 3 | 3 | 3 | 3 | 3 |
| Speed Range (RPM): | 100 - 300 | 80 - 240 | 80 - 240 | 60 - 200 | 60 - 160 |
| Main Drive Motor (HP): | 2 | 2 | 3 | 3 | 5 |
| Rapid feed Motor (HP): | 0.5 | 1 | 1 | 2 | 2 |
| Coolant Pump (HP): | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Net Weight (kgs): | 2000 | 2400 | 2800 | 3000 | 5000 |
| Approximate Dimensions (m): | 1.60 x 1.00 x 1.30 | 1.85 x 1.25 x 1.85 | 2.00 x 1.25 x 2.00 | 2.30 x 1.25 x 2.20 | 2.75 x 1.55 x 2.45 |
| Approximate Shipping Volume (m3): | 2.5 | 4.5 | 5.0 | 6.5 | 10.5 |
| Standard Accessories: Motors, control panel, rapid traverse, coolant pump, change gear set, tool kit |
|
TO OUR PAGE ON MACHINE TOOLS |
|
 |
Maneklal and Sons (Exports) |
 |
