Manek - universal tool and cutter grinder

Features:
- Wheel Spindle made of Alloy Steel and precision ground, runs on specially selected precision pre-loaded antifriction grease-packed bearings.
- The spindle accommodates easily interchangeable arbors.
- Easy access to control elements. Double control (UTCG-255) / Triple control (UTCG-270) to Table Movements. Table runs on rollers to give positive and accurate control.
- Wheel Head Pillar of large diameter designed to dampen vibrations. Exposed portion protected against dust by telescopic bellow guards

Specifications:

Model:	UTCG-255	UTCG-255/RB	UTCG-270	UTCG-270/RB
Swing over table (dia.) (mm):	255	350	270	360
Height of centres (mm):	125	170 (125 + 45 mm Rising Block)	130	175 (130 + 45 mm Rising Block)
Admit between tailstock centres (mm):	480	480	740	740
Admit between workhead and tailstock centres (mm):	370	370	600	600
Working Area of Table (mm):	700 x 125	700 x 125	990 x 135	990 x 135
Longitudinal Movement of Table (mm):	380	380	500	500
Cross Movement of Table (mm):	200	200	230	230
Vertical Traverse of Wheelhead (mm):	270	270	270	270
Swivel of Table:	45^o on either side	45^o on either side	45^o on either side	45^o on either side
Fine Adjustment:	9^o on either side	9^o on either side	9^o on either side	9^o on either side
Swivel of Wheelhead - Horizontal Axis:	350^o	350^o	350^o	350^o
Swivel of Wheelhead - Vertical Axis (Tilting):	90^o on either side	90^o on either side	25^o on either side	25^o on either side
Least count of dial for cross and vertical traverse (mm):	0.02	0.02	0.02	0.02
Grinding spindle speed (rpm):	3400 / 5000	3400 / 5000	3400 / 5000	3400 / 5000
Max. Diameter x Width of Grinding Wheel (mm):	175 x 20	175 x 20	175 x 20	175 x 20
Motor:	0.75 HP	0.75 HP	1.00 HP	1.00 HP
Net / Gross Weight (kgs):	600 / 850	600 / 850	1000 / 1400	1000 / 1400
Dimensions (m):	1.1 x 1.3 x 1.4	1.1 x 1.3 x 1.4	1.7 x 1.3 x 1.8	1.7 x 1.3 x 1.8
Shipping Volume (m³):	2.0	2.0	4.0	4.0

Standard Accessories: Motor, Workhead, A pair of Tailstocks, Reduction Sleeves for Workhead (MT 3, 2 & 1 for UTCG-255 & MT 4, 3, 2 & 1 for UTCG-270), Wheel Dresser with Diamond, Wheel Guards, Gauge for setting Centre Height, Grinding Wheel Flanges, Set of Finger Rests, Clearance Angle Setting Device with Carrier (for left hand tailstock), set of spanners.

Optional Accessories:
1. Cylindrical grinding attachment
2. Internal grinding attachment
3. Universal 3-way machine vice with 4" Jaw
4. Radius Dressing attachment (concave or convex)
5. Three-Point Steady Rest
6. Face Mill Cutter grinding attachment
7. Gear Milling Cutter grinding attachment
8. Spiral & Hob grinding attachment
9. Radius grinding attachment
10. Long Reamer grinding attachment
11. Radial Relieving attachment for Taps, Dies and Cutters
12. Combined Axial / Radial relief grinding attachment for step drills and form cutters
13. Drill-Point grinding attachment
14. Wheelhead mounted Radius / Angular wheel-dressing attachment
15. Collet Chucking attachment
16. Collets
17. Positive indexing attachment
18. Coolant equipment with pump and splash-guard

TO OUR PAGE ON MACHINE TOOLS

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962 Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com