|
|
|
|
|
The Roll Forming Line consists of
the following:
1. Uncoiler: Single Head Type, 4-Leaved, Expansion and Collapsed by Screw. Simple shaft and screw mechanism. The shaft is inserted inside the coil eye hole and tightened by the screw fitted on the shaft. After mounting the coil on the shaft, the shaft is then mounted on the bush block and rotated by the pinch roll. 2. Roll Forming Machine: 17 stations for forming the corrugations 3. Hydraulic Cut-Off Machine: This shear strikes slowly by hydraulic cylinder. The shear comprises a fixed lower knife beam and upper moving knife beam actuated by one hydraulic cylinder. A Spring operated sheet clamp will be provided to hold the sheet during the shear operation. A Hydraulic Unit provides hydraulic power for the shear. It comprises a hydraulic pump and A.C. motor mounted on a mild steel tank base plate. The unit is complete with oil filter, filler cap, oil level indicator with dial and the necessary supply and return flanges. A control station is supplied and is situated in a convenient position. The station contains the necessary pressure gauge, control valves, other hydraulic valves and necessary piping. 4. Control Cabinet: This unit consists of one control panel for hydraulic and forming machine, limit switches, emergency stop, electric cable, etc. It’s function is to start and stop the Forming machine, to start and stop the Hydraulic Power Pack and to control Hydraulic Cylinder of Hydraulic Cut-Off Machine. |
|
|
|
| Specifications: |
| Decoiler | Model: | DC-1 |
| Capacity: | 8 Tons | |
| Shaft Diameter: | 175 mm | |
| Net / Gross Weight: |
3100 / 3500 kgs |
|
| Case Dimension: | 2700 x 1300 x 1500 mm | |
| Roll Forming Machine | Model: | RFM-1250 |
| Corrugation Type: | Pitch 76.2 +/- 1 mm; Depth 18 +/- 1.5 mm | |
| Forming Roller Stations: | 16 Stations | |
| Forming Roller size: | 150 mm (for soft quality sheet) | |
| Forming Speed: | 12 meters / min | |
| Motor: | 10 HP | |
| Capacity Width: | 1000 to 1250 mm | |
| Capacity Length: | up to 9999 mm (optional piler table required for maximum length you wish to produce) | |
| Material of Sheet: | Soft Quality (Annealed) Galvanized Sheet | |
| Sheet Thickness: | 0.3 to 0.7 mm | |
| Net / Gross Weight: | 5700 + 6700 / 6500 + 7500 kgs | |
| Case Dimension: | 5900 x 2100 x 1400 mm + 4800 x 2100 x 1800 mm | |
| Hydraulic Cut-off Machine | Model: | HC-1 |
| Blade Size: | 20 x 70 x 1170 mm | |
| Case Dimension: | packed with Roll Forming Machine | |
| Control Cabinet | Model: | CC-1 |
| Case Dimension: | packed with Roll Forming Machine | |
| General Specifications | ||
| Total Net / Gross Weight: | 15,500 / 17,500 kgs | |
| Shipment: | In 1 x 40 Feet + 1 x 20 Feet containers |
|
|
|
|
|
|
| Standard Accessories: Decoiler, Roll Forming Machine with electricals, Hydraulic Cut-Off Machine with Power Pack, Control Cabinet with electricals. |
| Auxiliary Equipment: Piler Table as per the maximum length of Corrugated Sheet required. |
We also offer BARREL CORRUGATION MACHINE - Please follow this link for details
|
TO OUR PAGE ON SMALL SCALE INDUSTRY PROJECTS |
|
 |
Maneklal and Sons (Exports) |
  |
