MANEK - TIG welding machines

Thyristorised Tig Welding Machine

Specifications:

Model:	THYROTIG-200	THYROTIG-300	THYROTIG-400	THYROTIG-600
Primary Current at Max. Rated (Amps):	15	22	30	44
Input Supply Cable section (mm2):	10	10	10	16
At max. Rated (KVA):	9.5	14	19	28.5
Open Circuit Voltage (Volts):	75 - 85	75 - 85	75 - 85	75 - 85
Max. Current @ 60% Duty Cycle (Amps):	200	300	400	600
Current Setting Range (Amps):	10 - 200	10 - 300	10 - 400	10 - 600
Welding Cable Section (Cu) (mm2):	35	50	50	70
Cooling Forced	Air Cooling
Type of Winding:	Copper
Input Supply Voltage:	380 - 440 V AC / 3 Phase / 50 Hz
Class of Insulation:	H
Approximate Net Weight (kgs.):	160	160	160	180
Approximate Machine Dimensions (mm):	825 x 500 x 600	825 x 500 x 600	825 x 500 x 600	800 x 675 x 1050


Pulse Tig Welding Machine	Thyristorised Power Source (Rectifier)	Tig Welding Control Unit

Equipment consists of the following:
- D.C. power sourse with inbuilt / separate Tig Welding Control Console Unit & Water Cooling System. The Water Cooling System consists of a Water Pump, Rust Proof Water Tank, (Cooling Fan and Radiator on demand)
- Tig Welding Torch
- Flow Meter with pressure regulator
- Set of Accessories

Optional Equipment:
- Set of welding accessories
- Voltmeter (Ammeter is fitted as standard)
- Energy Saver and Arc Force Facitity
- Hot Start Facility
- Tig Spot Welding Facility to make a one sided spot

Pulser Unit:
- Peak Timing, Background Timing, Up Slope Timing and Down Slope Timing: 0.1 to 2.5 sec.

Tig Welding Control Unit (H.F. Unit):
- H.F Cutting Off timing: 0 to 10 secs.
- Gas post flow / pre flow: 0 to 10 secs.

TO OUR PAGE ON WELDING MACHINE

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962 Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com