Probadores de Baterías

Change Language to English

Battery Capacity Testers Digital Battery Testers & Voltmeters Battery Tester for 2 Wheeler Battery
6 & 12 Volt Battery Tester Digital Volts / Amps Tester Tach-Dwell Tester

Battery Capacity Testers

Top

* These Testers have been based on the Japanese Industrial Standard JIS-D 5301 for Lead Acid Batteries.
* The tester has a 3 1/2 digit 20 Volts LED Voltmeter, powered by the Battery under test
* The tester has 3 loads of 150 / 300 / 500 Amps, which could be selected, depending on the capacity of the Battery, by means of a 3-way switch. The selected load is indicated by the digital display
* Colour coded LEDs flash to indicate the condition of battery under load.
* To avoid over-discharging the battery under load test, an electronic timer is provided which imposes the battery under test for a fixed time
* Model BCT-500A is additionally provided with a 3 1/2 digit LED Ammeter of 0 - 200 Amps to check the charging current of the battery. It can also be used to check the cranking current of the starter motor, provided it is below 200 Amps
* The Model BCT-500 can test the Battery Voltage, Battery Condition under Load and Voltage Regulator. The Model BCT-500A can additionally test the and Battery Cranking Voltage
* Both the models are supplied trolley mounted with cables and clamps


Model: BCT-500
Model: BCT-500
For testing: 12 V battery & charging systems
Load: 150 / 300 / 500 Amps
Voltmeter: 20 Volt LED
Ammeter: --
Powered by: Battery under test
Dimensions (mm): 380 x 300 x 210
Net Weight (kgs): 7.0
Model: BCT-500A
For testing: 12 V battery & charging systems
Load: 150 / 300 / 500 Amps
Voltmeter: 20 Volt LED
Ammeter: 0 - 200 Amps
Powered by: Battery under test
Dimensions (mm): 380 x 300 x 210
Net Weight (kgs): 8.0

Model: BCT-500A

Digital Battery Testers and Voltmeters

Top

* Model: BCT-5 DPM is a rugged heavy duty model designed to test 12 V batteries under load, charging systems and starter motor. Colour coded LEDs flash to indicate the condition of battery under load.
* Model: BCT-7 DPM is a portable model to test load, battery condition, starter motor and charging system of 12 V batteries. Colour coded LEDs flash to indicate the condition of battery under load.
* LED Voltmeter is a digital voltmeter having Light Emitting Diode display. It is powered by the battery under test and can be used for testing voltages between 8 - 20 Volts
* LCD Voltmeter is a digital voltmeter having Liquid Crystal display. It has a range of 0 - 20 V with a least count reading of 0.01 Volts. It is used for testing open circuit voltage of 2V, 6V and 12 V batteries as well as the charging system of an automobile. Also available with range of 0 - 200 V to test 24 Volts system


Model: BCT-5 DPM
Model: BCT-5 DPM
For testing: 12 Volts
Load: 150 Amps
Voltmeter: LED
Range: 20 Volts
Powered by: Battery under test
Dimensions (mm): 220 x 160 x 120
Net Weight (kgs): 2.8
Model: BCT-7 DPM
For testing: 12 Volts
Load: 60 / 125 Amps
Voltmeter: LED
Range: 20 Volts
Powered by: Battery under test
Dimensions (mm): 250 x 100 x 60
Net Weight (kgs): 1.2

Model: BCT-7 DPM

LED Voltmeter
Model: LED Voltmeter
For testing: 12 Volts
Voltmeter: LED
Range: 8 to 20 Volts
Powered by: Battery under test
Dimensions (mm): 140 x 70 x 20
Net Weight (kgs): 0.3
Model: LCD Voltmeter
For testing: 2, 6, 12 & 24 Volts
Voltmeter: LCD
Range: 0 - 20 / 0 - 200 Volts
Powered by: 9 Volts Battery
Dimensions (mm): 140 x 70 x 20
Net Weight (kgs): 0.3

LCD Voltmeter

Battery Tester for 2 Wheeler Batteries Model: BCT-7MX

Top

* A Digital Battery Tester to test 12 V batteries used in motorcycles and scooters. The tester has two loads - 10 Amps to test 2.5AH batteries and 40 Amps to test batteries of 5.0 AH and above

* The tester checks Battery Voltage at No-Load, Battery Voltage under Load and Battery Charging Voltage

* The tester has a 3 1/2 digit LED Voltmeter, which is powered by the battery under test


6 & 12 Volt Battery Tester Model: BCT-7

Top

* This tester checks the battery condition and performs load capacity test, starter motor condition test and full charging system analysis

Digital Volt / Amps Tester

Top


Model: Mark-I
Model: Mark - I
For testing: 6 V, 12 V, & 24 V Systems
Voltmeter: 0 - 200 Volt
Ammeter: 0 - 200 Amps
Powered by: 9 V Battery
Dimensions (mm): 220 x 160 x 120
Net Weight (kgs.): 2.5
Model: Mark - II
For testing: 12 V Systems only
Voltmeter: 0 - 20 Volt
Ammeter: 0 - 200 Amps
Powered by: Battery under test
Dimensions (mm): 250 x 100 x 60
Net Weight (kgs.): 1.2

Model: Mark-II

Tach-Dwell Tester

Top

* The Tach-Dwell tester has been designed to check the RPM and Dwell Angle of 3 and 4 Cylinder cars
* Easy to operate, the tester has a 3 1/2 digit LED meter, powered by the battery under test

 


Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Telf.: +9122-22041340 / 41 / 42. Fax: +9122-22041389
Para hablar en español llame al: +9122-22041390
WhatsApp: +918652695030

e-mail: ventas@maneklalexports.com / MaquinariaManek@gmail.com / Formulario de Consulta

Home  Top

A NUESTRA PÁGINA DE MAQUINARIA PARA RECONSTRUCCIÓN DE MOTORES

Back   Next