Estampadora y Roedora / Cortadora de Chapa Universal

Change Language to English

Presentaciones:

- Apropiado para producción pequeña. Reemplaza uso de matrices de punzonar grandes y punzones
- Ideal para hojalatería, fabricante de tableros de control, fabricante de cabinas y carrocería, fabricante de automóviles, etc.
- Largo de la carrera de la herramienta ajustable fácilmente sobre pasos variables
- Operaciones distintas necesitan herramientas distintas
- La herramienta superior y inferior cambiado en operación de ribetear, plegar, rebordear y punzar
- El principio de funcionamiento de la máquina es que la hoja se corta o se forma entre el movimiento recíproco rápido de la herramienta superior (accionado por un motor eléctrico y accionada por una manivela excéntrica) y una herramienta inferior estacionaria, por punzonado progresiva mientras que la hoja esta alimentada.

Especificaciones:

Modelo: GN-3 GN-5 GN-8

Garganta (mm):

900 1000 1250

Capacidad máx. en diámetro de cortar círculos de blancos cuadrados (mm):

740 830 1000

Largo de la carrera (mm):

1 - 8 1.5 - 9 2 - 10

No. de carreras por minuto:

1440 1440 720 / 1440

Alza máx. de la herramienta (mm):

15 15 25

Motor (HP)

2 3 5

Peso Neto / Bruto (Kg.):

700 / 900 1250 / 1500 2200 / 2500

Dimensiones (m):

1.8 x 1.6 x 0.5 2.0 x 1.6 x 0.5 2.8 x 2.0 x 0.6

Volumen del embarque (m3):

1.5 1.6 3.4
Capacidad de la Maquina (Espesor de la chapa) *:
  Model: GN-3 GN-5 GN-8
Cortar Recto / Cizallamiento desde el borde (mm): 3.2 5.0 8.0
desde el interior con un agujero para empezar (mm): 3.2 5.0 8.0
sin agujero para empezar  (mm): 2.5 4.0 6.0
Cortar con Punta (Nibbling) desde el borde (mm): 2.5 4.0 6.0
desde el interior con un agujero para empezar (mm): 2.5 4.0 6.0
sin agujero para empezar  (mm): 2.0 3.0 4.0
Entalladura Rectangular espesor de la chapa / ancho de la entalladura (mm): 2.0 / 8.0 3.0 / 10.0 4.0 / 12.0
Cortar Figuras espesor de la chapa (mm): 2.0 3.0 5.0
Cortar Ranuras espesor de la chapa / ancho de la ranura (mm): 2.5 / 8.0 4.0 / 10.0 5.0 / 10.0
Cortar Lucernas espesor de la chapa (mm): 2.25 3.0 4.0
Bordeador / Ribetear espesor de la chapa / profundidad de ribete (mm): 2.0 / 4.0 2.5 / 5.0 3.0 / 6.0
Plegamiento espesor de la chapa / profundidad de plegamiento (mm): 2.0 / 6.0 2.5 / 8.0 3.0 / 10.0
Rebordear espesor de la chapa / altura de reborde (mm): 2.0 / 8.0 3.0 / 12.0 3.0 / 15.0
Martillar / Cóncavo espesor de la chapa (mm): 2.0 2.5 3.0
Punzar Agujeros espesor de la chapa (mm): 1.5 2.5 3.0
Cortar Discos (Interior / Exterior) espesor de la chapa (mm): 2.0 3.0 5.0

*- NOTA: Capacidad del espesor para acero suave de 45 kg / mm2

Accesorios Estándar: Dos guías para montar los accesorios, juego de porta-herramientas con fresas de cortar figuras, motor eléctrico, arrancador y llaves

Accesorios Opcional: Amortiguador de vibración, accesorio manual para alimentación recto, accesorio para cortar círculos / discos (interior y exterior), herramienta para cortar con punta (nibbling tool), herramienta para cortar lucerna, herramienta para ribetear, herramienta para entallar rectangular, herramienta para martillar, herramienta para rebordear, herramienta para ranurar, herramienta para punzar, herramienta para plegamiento, mesa ball top.

 

   

VIDEO DE LA MAQUINA ESTAMPADORA MODELO: GN-5 EN VARIOS OPERACIONES

* - El accesorio manual para alimentación recto es necesaria para estas operaciones
- Todas las herramientas excepto los porta-herramientas con cortadoras de figura son opcionales

 
1. Shearing Tools are available for straight cutting, figure cutting, (contour cutting) and circle cutting operations. The shearing length per cut is small and there is no wastage of materials.

2. Nibbling is a continuous punching operation with a circular tool and is used for producing internal and external cut-outs of any shape. The work-piece does not warp but the edges produced may require little filing, depending on the end use. The fixed nibbling tool is a solid punch cutting at one side. The punch and die clearance is provided to suit the sheet thickness and the feed is controlled by the tool design.

3. Rectangular Notching is a continuous punching operation with a square punch and die. It is used mainly for producing internal rectangular cut-outs. The tool cuts in two directions and the edges produced are clean.

4. Figure Cutting can be done with both the processes i.e. round nibbling die punch as well as with the help of shearing tools. It is a quick and economical way to produce the parts or cut-outs of any shape and size.

5. Slot Cutting is done with a double-edge cutting tool, which avoids warping of sheets. Suitable for parting of sheets, cutting small strips and slots. The upper tool has to be changed for each slot width while the bottom tool is adjustable.

6. Louver Cutting is a combined shearing and forming operation. The sheet is first cut and then the louver is formed with the forming part of the tool. The length of the louvers produced is independent. This operation as well as beading, folding and flanging are completed in 2 to 3 passes. After every pass the tool is fed further towards the sheet with the help of a hand wheel.

7. Beading is a forming operation used for the stiffening (providing strength) of sheets.

8. Folding is a forming operation and by double folding, channels may be made for housing of electrical wiring, etc.

9. Flanging is a forming operation very commonly used on sheet metal parts. 0o to 90o flanging is possible by changing the lower tool. 2 to 3 passes are generally required and intermediate annealing may be necessary in some cases to get the correct angle of flange.

10. Dishing or Peening is a mechanical hammering operation used for forming dished parts like tank bottoms. The quality of dishes formed depends on the skill of the operator.

11. Punching is possible with special punch and dies sets. Round and Square holes such as the ones needed for fixing lamps or push buttons etc. on panels can be produced on these machines by providing a shear on the punch

12a. Circle Cutting (Inside) attachment is capable of cutting small holes from 100 mm diameter up to 75% of the throat depth of the machine.

12b. Circle Cutting (Outside) attachment is capable of cutting large circles. Centre punch mark is necessary for sheet thickness up to 2 mm. Centre locating hole of 5 mm is require for sheet thickness above 2 mm.

Maneklal Global Exports
67 Bajaj Bhavan, Nariman Point, Mumbai - 400021, INDIA
Telf.: +9122-22041340 / 41 / 42. Fax: +9122-22041389
Para hablar en español llame al: +9122-22041390
WhatsApp: +918652695030

e-mail: ventas@maneklalexports.com / MaquinariaManek@gmail.com / Formulario de Consulta

Home   Top

A NUESTRA PÁGINA DE MÁQUINAS HERRAMIENTAS

Back     Next