|
|
 |
Presentaciones: -
Diseño compacto y rígido |
 Modelo: TR-24 B |
 Modelo: TR-42 D |
| Modelo: | TR-24 B | TR-42 D | TR-80 A |
| Diámetro máximo de pieza de trabajo (mm) | 3 - 24 | 3 - 42 | 10 - 80 |
| Paso máximo de la rosca (rosca estándar 'V') (mm): | 3 | 5 | 10 |
| Paso dentado máximo (mm): | 1.0 | 1.6 | 3.0 |
| Ancho máximo de la matriz (mm): | 80 | 150 | 200 |
| Largo máximo de la rosca con avance pasante (mm): | 6000 | 6000 | 6000 |
| Fuerza máxima de Laminación (infinitivamente ajustable) (Toneladas): | 8 | 16 / 20 | 30 |
| Tiempo máximo de Laminación y Marchar en Vació (infinitivamente ajustable) (Segundos): | 30 | 30 | 60 |
| Giratorio del eje de husillo con avance pasante: | 5o | 5o | 12o |
| Diámetro del Husillo (mm): | 40 | 54 | 69.85 |
| Diámetro máximo de la matriz para laminación (mm): | 120 | 180 | 220 |
| Velocidad del Husillo (revoluciones): | 60 / 90 | 20 / 40 / 60 | 16 / 22 / 34 / 73 / 110 / 150 |
| Motor Principal (kW): | 2.2 | 3.7 / 5.6 | 11 |
| Motor para el fuente de energía hidráulica (kW): | 0.75 | 1.5 / 2.2 | 2.2 |
| Bomba Enfriador (HP): | 1/8 | 1/8 | 1/2 |
| Peso neto / bruto (kilos) | 1000 / 1500 | 2200 / 2750 | 3500 / 4250 |
| Volumen de Embarque (m3) | 2.0 | 3.0 | 5.0 |
|
|
 Modelo: TR-80 A |
Accesorios
Estándar:
Motores Accesorios Opcional: Lubricación Automática, Montaje entre centros, Eliminador de contragolpe, Soportes para cojinete, Accesorio para Laminar de nuevo
|
|
Rolling Process: Thread Rolling is a chip-less Cold-Forging Process. A plain cylindrical blank, with a diameter part way between the major and minor diameters of the finished thread, is rotated and squeezed between cylindrical type hardened steel dies whose working surfaces are the reverse of the thread form to be produced. The threads of the die penetrate the surface of the black as it rolls between them, displacing material to form the roods of the threads, and forcing the displayed material radially outward to form the crests. Unlike other threading processes, no material is wasted. Most threads are rolled by the in-feed method in which the entire thread length is formed simultaneously without axial movement of the part. Threads that are too long to be produced by the in-feed method can, however, be rolled by a thru-feed method on these machines. |
|
|
|
A NUESTRA PÁGINA DE MÁQUINAS HERRAMIENTAS |
|
 |
Maneklal and Sons (Exports) |
 |
