Máquinas de Inyección Plástico

Change Language to English

Injecta - Horizontal Hydraulic Plastic Injection Moulding Machines Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type Vertical Plastic Injection Moulding Machines
PLASJET - Horizontal Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw AUTOMIC - Mechanical Type Semi-automatic Vertical Plastic Injection Moulding Machines  

INJECTA - Horizontal Hydraulic Plastic Injection Moulding Machines

Top


Semi Automatic Plunger Type MODEL: IN-60, IN-75

Fully Automatic Plunger Type MODEL: IN-100, IN-125


Fully Automatic Screw Type MODEL: IN-100S, IN-125S

Horizontal Hydraulic, Semi and Fully Automatic Plastic Injection Moulding Machines, Plunger Type

Specifications:

MODEL: IN - 60 IN - 75 IN - 100 IN - 125
Max. Moulding Capacity* (gms.): 60 75 100 125
Max. Injection Pressure (kg / cm2) / (psi): 1000 / 15000 1000 / 15000 1000 / 15000 1000 / 15000
Max. Plasticising Capacity*
Semi Automatic (kg / hr):
7.20 9.00 10.00 10.00
Max. Plasticising Capacity*
Fully Automatic (kg / hr):
10.80 12.00 13.00 13.75
Max. Shots per Hour*
Semi Automatic (nos / hr):
120 120 100 80
Max. Shots per Hour*
Fully Automatic (nos / hr):
180 160 130 110
Max. dimensions of mould L x B x H (mm): 245 x 250 x 250 270 x 250 x 270 290 x 300 x 300 290 x 300 x 300
Max. Mould Opening (mm): 225 250 300 320
Number of Tie Bars (nos.): 2 2 4 4
Clear Gap between Tie Bars (mm): 275 300 320 x 145 320 x 145
Centre Height of Injection Nozzle (mm): 175 190 225 225
Clamping Force (tons): 30 35 60 80
Max. Pump Pressure (adjustable) (kg / cm2): 140 140 140 140
Oil Tank Capacity (liters): 100 115 150 150
Electric Motor (HP): 7.5 10 12.5 12.5
Total Heating Load (kW): 1.5 1.75 3.0 4.0
Approximate Machine Dimensions (mm): 2300 x 600 x 1400 2500 x 600 x 1400 2800 x 750 x 1600 3000 x 750 x 1600
Approximate Net / Gross Weight (Kgs.): 1000 / 1300 1300 / 1500 2500 / 2800 2600 / 3000
Approximate Shipping Volume (m3): 2.85 3.10 4.70 5.00

Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machines, Screw Type

Specifications:

MODEL: IN - 60S IN - 75S IN - 100S IN - 125S
Screw Diameter (mm): 30 30 35 35
Max. Moulding Capacity* (gms.): 60 75 100 125
Max. Injection Pressure (kg / cm2): 1100 1200 1800 1800
Max. Plasticising Capacity* (kg / hr): 14.4 18 18 22.5
Max. Shots per Hour* (nos / hr): 240 240 180 180
Dry Cycles per Hour: 400 400 350 350
Max. Swept Volume (cm3): 77 90 120 140
Max. dimensions of mould L x B x H (mm): 245 x 250 x 250 270 x 250 x 270 290 x 300 x 300 290 x 300 x 300
Max. Mould Opening (mm): 225 250 300 320
Number of Tie Bars (nos.): 2 2 4 4
Clear Gap between Tie Bars (mm): 275 300 320 x 145 320 x 145
Centre Height of Injection Nozzle (mm): 175 190 225 225
Clamping Force (tons): 30 35 60 80
Max. Pump Pressure (adjustable) (kg / cm2): 140 140 140 140
Oil Tank Capacity (liters): 100 115 175 200
Electric Motor (HP): 7.5 10 12.5 12.5
Total Heating Load (kW): 1.5 1.75 2.5 3.2
Approximate Machine Dimensions (mm): 2300 x 600 x 1400 2500 x 600 x 1400 2800 x 750 x 1600 3000 x 750 x 1600
Approximate Net / Gross Weight (Kgs.): 1200 / 1500 1500 / 1700 2700 / 3000 2800 / 3200
Approximate Shipping Volume (m3): 2.85 3.10 4.70 5.00

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes, acrylics, ABS, flexible PVC, rigid PVC (in Screw Type machines only), etc.  Extra optional Nozzles available for moulding Nylon, Polyester, etc.

* - Depends on material, processing conditions, individual articles, mould design, etc.


VIDEO OF IN-75S INJECTION MOULDING MACHINE

VIDEO OF IN-100 INJECTION MOULDING MACHINE

Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type

Top


Model: 40HM


Specifications:

Model: 40HM
Max. Moulding Capacity (gms.): 40
Stroke of Injection Plunger (mm): 150
Injection Pressure - adjustable (kg / cm2): 1200
Clamping Force - adjustable (tons): up to 4
Clamping Stroke (mm): 125
Working Base Width (mm): 175
Distance - back to barrel nozzle (mm): 80
Distance - barrel nozzle to base - adjustable (mm): 80 - 175
Max. Moulding Area (mm2) 5000
Electric Motor (HP): 2
Electric Heater (kW): 0.75
Approximate Machine Dimensions (mm): 1500 x 610 x 1500
Approximate Net / Gross Weight (Kgs.): 175 / 250
Approximate Shipping Volume (m3): 1.40


VIDEO OF 40-HM INJECTION MOULDING MACHINE


Vertical Plastic Injection Moulding Machines

Top

Vertical Plastic Injection Moulding Machines with Horizontal Hydraulic Toggle Locking


MODEL: 60-VH/S

- Horizontal Toggle Locking (Hydraulic Toggle)

- Injection Unit can be raised and lowered vertically as per requirement of moulds

- Mould Runner center can be aligned horizontally by shifting the fixed platen

- Plunger Type Machine Model 60-VH available in both Semi and Fully Automatic Type.

- Screw Type Machine Model 60-VH/S available in Fully Automatic Type (Suck back provided)


MODEL: 60-VH Fully Automatic
MODEL: 60-VH 60-VH/S
Type: Plunger Type Screw Type
Max. Moulding Capacity* (gms.): 60 60
Screw Diameter (mm): -- 30
Max. Swept Volume (cm3): -- 70
Max. Injection Pressure* (kg / cm2): 900 1100
Max. Plasticising Capacity*
Semi / Fully Automatic (kg / hr):
7.2 / 10.8 -- / 14.4
Max. Shots per Hour*
Semi / Fully Automatic (nos / hr):
120 / 180 -- / 240
Max. dimensions of mould L x B x H (mm): 200 x 200 x 200 200 x 200 x 200
Max. Mould Opening (mm): 200 200
Number of Tie Bars: 2 2
Clear Gap between Tie Bars (mm): 230 230
Injection Nozzle Centre (mould back to Runner) (mm): 30 - 80 Adjustable 30 - 80 Adjustable
Clamping Force (Adjustable) (Tons): 25 Hydraulic Toggle 25 Hydraulic Toggle
Max. Pump Pressure (adjustable) (kg / cm2): 140 140
Oil Tank Capacity (Liters): 75 75
Electric Motor (HP): 3 3 (Hydraulic System) + 2 (Screw Drive)
Total Heating Load (kW): 1.5 1.5
Approximate Machine Dimensions L x B x H (mm): 1480 x 700 x 2400 1480 x 700 x 2400
Approximate Net / Gross Weight (Kgs.): 700 / 1000 850 / 1150
Approximate Shipping Volume (m3): 3.20 3.20


Vertical Semi Automatic Bench Mounting Plastic Injection Moulding Machines Plunger Type


MODEL: 60-VH Semi Automatic

- Fully Hydraulic Injection and Clamping Unit

- Operation by manually actuated Hydraulic Valves

- Injection Unit vertically adjustable to accommodate various moulds

- Fixed mould plates adjustable to align nozzle centre to mould runner

- Direct mould clamping unit. Does not need adjustment for stroke as it is Direct Locking Type

- Hand Moulds can be used. Automatic moulds with vertical injection can also be used


MODEL: AU-30-HD
MODEL: AU-30-HD AU-60-HD
Max. Moulding Capacity* (gms.): 30 60
Max. Injection Pressure* (kg / cm2): 800 800
Max. dimensions of mould L x B x H (mm): 150 x 150 x 100 150 x 150 x 100
Adjustment of Fixed Mould Plate (min. / max.) (mm): 60 / 90 60 / 90
Vertical adjustment of Injection Unit to accommodate
mould height (min. / max.) (mm):
90 / 150 90 / 150
Maximum moulding projected area* (cm2): 30 40
Clamping Force (Tons): 7.5 7.5
Clamping Stroke (mm): 75 75
Electric Motor (HP): 2 2
Approximate Machine Dimensions L x B x H (mm): 1100 x 680 x 1250 1100 x 680 x 1325
Approximate Net / Gross Weight (Kgs.): 300 / 450 350 / 500
Approximate Shipping Volume (m3): 1.30 1.35

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Nozzles available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)

* - Depends on material, processing conditions, individual articles, mould design, etc.


PLASJET - Horizontal Fully Automatic Plastic Injection Moulding Machines with Direct Drive Screw

Top

- Soft mould closing and opening with speed control. Low Pressure mould protection provided
- Direct Hydraulic Screw drive with reciprocating injection carriage.
- Multi-Stage Injection pressure / speed
- Suck-back screw for melt decompression
- Injection with screw rotation facility
- Hydraulically and electrically interlocked safety gate
- Central lubrication
- PJ-65 and PJ-80 with Toggle Type mould clamping unit
- PJ-100 and PJ-180 with Direct Hydraulic Telescopic Ram type Clamping Unit

MODEL: PJ - 65 PJ - 80 PJ - 100 PJ - 180
Screw Diameter (mm): 35 35 40 55
Injection Pressure (Bar): 1760 1760 1350 1500
Stroke Volume (cm3): 105 120 201 380
Screw Stroke (mm): 110 135 160 190
Max. Injected Weight (Gms.): 95 117 180 340
Injection Rate (Gms./Sec.): 70 82 138 159
Plastisizing Rate (Gms./Sec.): 8.7 10.5 15 22
Screw Length (max.) (L/D): 22 22 20 16
Screw Speed (RPM): 250 250 250 200
Heating Capacity (kW): 6.0 6.5 10.0 11.0
No. of Heating Zones: 4 4 4 5
Nozzle Holding Force (kN): 20 20 40 50
Clamping Unit: Hydraulic Toggle Hydraulic Toggle Direct Hydraulic
Telescopic Ram
Direct Hydraulic
Telescopic Ram
Clamping Force (kN): 650 800 1000 1800
Mould Opening Stroke (mm): 300 300 500 550
Mould Height (min. / max.) (mm): 150 / 300 175 / 350 200 350
Max. Daylight (mm): 600 650 700 900
Clear Gap between Tie Bars (mm): 320 x 145 320 x 145 325 x 325 425 x 425
Size of Mould Plates (H x V) (mm): 500 x 325 500 x 325 525 x 525 650 x 650
Ejector Force (kN) Mechanical Mechanical 40 70
Ejector Stroke (mm): 90 90 95 125
Pump Drive (kW): 9.37 10.25 15 22.5
Total Connected Power (kW): 15.37 17.75 25 33.5
Oil Tank Capacity (liters): 225 250 375 500
Approximate Shipping Dimensions (mm): 3800x1000x1700 4000x1000x1700 5200x1200x1700 5600x1300x1800
Approximate Net / Gross Weight (Kgs.): 2300 / 2800 2500 / 3000 5000 / 6000 6500 / 7800
Approximate Shipping Volume (m3): 6.5 6.8 10.6 13.1

Optional Accessories:

Microprocessor Control with Mould Program Memory, Hydraulic Ejector


AUTOMIC - Mechanical Type Semi-automatic Vertical Plastic Injection Moulding Machines

Top

- Bench mounting type

- Moulds of hand opetared machines can be used

- Simple electrical system

- Versatile machine suitable for moulding various textile parts, automobile parts, industrial items, insert mouldings, electrical fittings, pens and stationary items, jewelry boxes, gift articles, hardware items, plumbing items, caps, closures, house hold articles, etc.

 

Model: AM-15 AM-30 AM-60 AM-100 AM-125 AM-180
Max. Moulding Capacity (gms.): 15 30 60 100 125 180
Max. Plasticising Capacity (kg / hr): 1.5 2.5 3.5 4.5 5.0 7.0
Max. Shots per Hour (nos / hr): 120 120 100 80 80 80
Distance - Back to Cylinder Nose (mm): 72 75 80 90 90 120
Distance - Cylinder Nose to Base (mm): 135 165 200 225 225 250
Working Base Width (mm): 300 300 325 325 375 400
Adjustment of Clamping Vice (mm): 70 80 110 125 125 135
Hopper Capacity (gms): 500 750 800 1000 1225 2000
Electric Motor (HP): 0.25 0.5 0.5 1.0 1.0 2.0
Heating Load (kW): 1.2 1.5 1.5 2.5 2.5 3.0
Net / Gross Weight (kgs): 175 / 235 250 / 340 300 / 400 325 / 440 350 / 470 450 / 600
Overall dimensions (m): 1.0 x 0.5 x 1.0 1.2 x 0.5 x 1.05 1.35 x 0.6 x 1.2 1.6 x 0.6 x 1.3 1.8 x 0.6 x 1.3 2.0 x 0.7 x 1.5
Shipping Volume (m3): 0.50 0.65 1.00 1.25 1.45 2.10

Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes (Extra optional Cylinders available for moulding Nylon, Polyester, acrylics, soft PVC, etc.)


M&S Logo

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Telf.: (+91 22) 22618951 / 22618962    Fax: (+91 22) 22618903
Para hablar en español llame al: (+91 22) 22618950
Celular / WhatsApp: +91 86526 95030

e-mail: ventas@maneklalexports.com / MaquinariaManek@gmail.com / Formulario de Consulta

Home   Top