Manek - connecting rod and cap grinder, con rod aligner

Con Rod and Cap Grinder
- Corrects ovality from the big-end of the Connecting Rod and Main Bearing Cap
- Removes minute quantities of material from the joining faces of the Cap and Rod
- Removes material from the contact faces of main bearing caps before line boring

Model:	CAPGRIND 150
Maximum Length of Cap:	150 mm
Maximum Width of Cap:	50 mm
Grinding Wheel:	150 mm x 80 mm x 31.75 mm
Motor:	0.5 HP, 2800 RPM
Shipping Dimensions:	860 mm x 355 mm x 375 mm
Net / Gross Weight:	36 Kgs. / 51 Kgs.
Shipping Volume:	0.12 m³

Con Rod Aligner
- Perfect Aligning of Connecting Rods
- Precisely checks Straightness and Parallelism of Bores
- Extent of twist of the Connecting Rod can be read out directly on the dial gauge and can be rectified with a vice using the tools provided

Model:	CONALIGN AN-4080
Big End Diameter (Minimum):	40 mm
Big End Diameter (Maximum):	80 mm
Max. Length of Connecting Rod:	350 mm
Shipping Dimensions (mm):	590 x 340 x 670
Net / Gross Weight:	42 Kgs. / 67 Kgs.
Shipping Volume:	0.14 m³

Standard Accessories:

TO OUR PAGE ON AUTOMOTIVE ENGINE REBUILDING MACHINES

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962 Fax: (+91 22) 22618903
e-mail: sales@maneklalexports.com / maneklalexports@gmail.com