| Machines for Making Bucket Handles | |
Machine for making Loose Type Plastic Grips (For East - West & Rivet End Type Handles) |
| Machine for making Fixed Type Plastic Grips (For Regular Type Handles) |
|
|
|
|
 Model: BHM-25EP - For Handle Type East-West with Plastic Grip |
|
 Model: BHM-10R - For Handle Type Regular |
 Model: BHM-10R - For Handle Type Regular |
|
 Die of Model: BHM-25EP |
 System to insert Plastic Grips on Model: BHM-25EP |
 Die of Model: BHM-10R |
|
Standard Accessories: Electric Motor, Starter, Coil Stand, One Set of Toolings (for any one
size and type of handle) |
|
Different Types of Bucket Handles |
 OK-Type Bucket Handle |
 Regular Type Bucket Handle with fixed Plastic Grip |
 East-West Type Bucket / Paint Can Handle |
 East-West Type Bucket / Paint Can Handle with loose Plastic Grip |
 Rivet End Type Bucket / Paint Can Handle |
 Rivet End Type Bucket / Paint Can Handle with loose Plastic Grip |
|
|
 |
|
Horizontal Hydraulic, Fully Automatic Plastic Injection Moulding Machine, Screw Type |
 Model: IN-75S |
 |
|
Specifications: |
| Model: | IN - 75S | IN - 100S |
| Screw Diameter (mm): | 30 | 35 |
| Max. Moulding Capacity* (gms.): | 75 | 100 |
| Max. Injection Pressure (kg / cm2): | 1200 | 1800 |
| Max. Plasticising Capacity* (kg / hr): | 18 | 18 |
| Max. Shots per Hour* (nos / hr): | 240 | 180 |
| Dry Cycles per Hour: | 400 | 350 |
| Max. Swept Volume (cm3): | 90 | 120 |
| Max. dimensions of mould L x B x H (mm): | 270 x 250 x 270 | 290 x 300 x 300 |
| Max. Mould Opening (mm): | 250 | 300 |
| Number of Tie Bars (nos.): | 2 | 4 |
| Clear Gap between Tie Bars (mm): | 300 | 320 x 145 |
| Centre Height of Injection Nozzle (mm): | 190 | 225 |
| Clamping Force (tons): | 35 | 60 |
| Max. Pump Pressure (adjustable) (kg / cm2): | 140 | 140 |
| Oil Tank Capacity (liters): | 115 | 175 |
| Electric Motor (HP): | 10 | 12.5 |
| Total Heating Load (kW): | 1.75 | 2.5 |
| Approximate Machine Dimensions (mm): | 2500 x 600 x 1400 | 2800 x 750 x 1600 |
| Approximate Net / Gross Weight (Kgs.): | 1500 / 1700 | 2700 / 3000 |
| Approximate Shipping Volume (m3): | 3.10 | 4.70 |
 Model: IN-100S |
|
Thermoplastics Moulded: Polystyrenes, Polyethylenes, Polypropylenes, acrylics, ABS, flexible PVC, rigid PVC (in Screw Type machines only), etc. Extra optional Nozzles available for moulding Nylon, Polyester, etc. * - Depends on material, processing conditions, individual articles, mould design, etc. |
 9 Cavity Die for making Plastic Grips with IN-75S |
 16 Cavity Die for making Plastic Grips with IN-100S |
|
|
|
Vertical Hydraulic, Semi-Automatic Plastic Injection Moulding Machine, Plunger Type |
 Model: 40HM |
 Die for fixing Plastic Grips |
|
Specifications: |
| Model: | 40HM |
| Max. Moulding Capacity (gms.): | 40 |
| Stroke of Injection Plunger (mm): | 150 |
| Injection Pressure - adjustable (kg / cm2): | 1200 |
| Clamping Force - adjustable (tons): | up to 4 |
| Clamping Stroke (mm): | 125 |
| Working Base Width (mm): | 175 |
| Distance - back to barrel nozzle (mm): | 80 |
| Distance - barrel nozzle to base - adjustable (mm): | 80 - 175 |
| Max. Moulding Area (mm2) | 5000 |
| Electric Motor (HP): | 2 |
| Electric Heater (kW): | 0.75 |
| Approximate Machine Dimensions (mm): | 1500 x 610 x 1500 |
| Approximate Net / Gross Weight (Kgs.): | 175 / 250 |
| Approximate Shipping Volume (m3): | 1.40 |
|
TO OUR PAGE ON SMALL SCALE INDUSTRY PROJECTS |
|
 |
Maneklal and Sons (Exports) |
  |
