| Model: | TSM - 1 |
| Capacity - width (mm): | 1000 |
| Capacity - thickness (mm): | 0.3 |
| Net / Gross Weight (Kgs.): | 250 / 325 |
| Shipping Volume (m3): | 1.00 |
|
|
Treadle Shearing Machine:
|
Gang Slitting Machine:
|
 |
|
|
Power Press:
|
|
Body Rolling Machine:
|
|
|
|
Bump Flanger:
|
|
Can Seaming Machines:
|
|
Note: Side Seam Welding Machine, Lug Welding Machine, Air Compressor, Die Sets for Top and Bottom, Conveyer System, etc. are required for which prices can be given against specific inquiry.
| Semi Automatic Tinplate Side Seam Welding Machine |
|
- Uniform Narrow and Consistent Weld at high operating speed
achieved
- Low production cost
- Notching of roll-formed blanks not necessary
Facilities Required at Customer’s End:
| Main Supply Cable: | 8 mm2 Copper / 12 mm2 Aluminium |
| Main Switch Fuses: | 32 Amps HRC |
| Compressed Air: | 5 kgf / cm2 |
| Tinplate Thickness: | 0.2 mm / 0.4 mm |
| Temper: | T3 / T4 |
| Copper Wire: | Electrolytic equivalent bright shot annealed having 1.4 mm dia. (oxygen free quality) |
| Water Cooling system: | In Built Cooling Unit OR 20 Lpm at 3 kgf / cm2 at 18oC free from impurities |
 |
*Note: Machine supplied with any one of the three arm length
Optional Accessory: Water Cooler, 10 HP Two Stage 120 PSI Air Compressor |
|
TO OUR PAGE ON SMALL SCALE INDUSTRY PROJECTS |
|
 |
Maneklal and Sons (Exports) |
  |
