pipe / tube straightening machine - Maneklal and Sons (Exports)

Features:

- Machines comprise of six / ten work rolls arranged in pairs
- Rolls quickly and easily adjustable angularly to give perfect contact between the tube and the roll, over the maximum effective roll profile
- Simple setting of the machine for different sizes of tubes
- All rolls driven by two identical electric motors
- Machines fitted with indicators for vertical and angular setting of rolls
- Machines available in Single Speed / Dual Speed / Variable Speed Options

To obtain best results from the machine, correctly designed inlet and outlet through are essential because the tube rotates at high speed and must be controlled before and after straightening.

Model: SE-15 with 10 Rolls

ROLLS: Made from Alloy Steel, Hardened, Hyperbolic Profile Ground and Lapped. Hyperbolic Profiles designed to accept wide range of tube diameters

ROLL CARRIERS: Designed to give maximum Roll Stability even when fully extended

MAIN DRIVE: Drive to the rolls by two totally enclosed gear boxes, each having three/five output shafts, connected by universal joints. Bottom rolls and Upper Rolls driven independently. Gears are single helical made from Alloy Steel, hardened & ground. Motors connected to the input shaft of the gear boxes by flexible coupling / ‘V’ belts

ENTRY GUIDES: Entry guides made from Teak Wood provided for the entire range. Special Elastomer Guides can be provided at extra cost

GUARDS: Perspex transparent screen guard provided in front of the rolls.

CONTROL PANEL: A control panel housing all electrical controls for running the machine provided.

Specifications: 6 & 10 Roll Tube Straightening Machines - ‘SE’ Series

Model		SE-10	SE-15	SE-20	SE-25	SE-30	SE-35	SE-40	SE-45	SE-50
Normal Capacity Range (Tube OD) (mm)		1.5 - 8	3 - 13	4.5 - 16	6 - 25	8 - 40	13 - 65	20 - 100	25 - 125	30 - 150
Max. Wall Thickness (mm)		1.5	2.5	2.5	3.2	4.5	6	8	8.5	9.5
Max. Diameter Admitted (mm)		8	13	20	32	45	75	115	140	165
Max. Wall Thickness at Max. Diameter (mm)		1.5	2.5	2	2.5	3.5	4.5	6.5	6.5	7
Normal Operating Speeds (m/min)	Single Speed Machine	18	36	36	40	53	53	53	40	40
	Dual Speed Machine	36, 18	60, 30	60, 30	80, 40	80, 40	80, 40	80, 40	80, 40	80, 40
	Variable Speed Machine	100 - 5	100 - 5	100 - 5	100 - 5	120 - 6	120 - 6	120 - 6	120 - 6	120 - 6

VIDEO OF TUBE STRAIGHTENING MACHINE: SE-10

Model: SE-20 with 6 Rolls

Model: SE-30 with 6 Rolls

Note:
- Capacities listed above are based on material having a yield strength not exceeding 32 kg/mm2 and are for general guidance only.
- Machine with capacity in excess of those specified above available on request

TO OUR PAGE ON MACHINE TOOLS

Maneklal and Sons (Exports)
237 / 239 Perin Nariman Street Fort, Mumbai - 400 001, INDIA
Tel: (+91 22) 22618951 / 22618962 Fax: (+91 22) 22618903 / 22679573
e-mail: sales@maneklalexports.com